Bellemave® Laptop Stand for Bed Tilting Overbed Table with Wheels, Height Adjustable Tray Bedside Table for Laptop Bed Sofa, WALNUT

Wow! I’m so impressed with this table. I purchased the “Used, Like New” to save some money and it was worth the gamble. The contents were complete and still brand new! It feels very sturdy and it’s easy to move and lock in place. Comes with every tool you need for assembly and was quick and easy to put together. I bought this for surgery recovery but I will be using it daily! Perfect for drawing, laptops, eating, and games. The only downside is fingerprints show on the black model but it’s extremely easy to clean.

Fits mac book air 15 in. Sturdy and easy to assemble. Rolls very smooth. The angle can be adjusted easily for wrist protection. So far it was worth it to buy this as a mini mobile work station.

I bought this laptop stand to use for my MacBook to do school work while watching my daughter. I can sit comfortable and tilt it towards me. I like that I can use my mouse on the little side table easily. The table is a bit short when going under the couch, but it's still comfortable to me. It was easy to put together.The only thing I don't really like about it: I'm not sure about the other colors, but I bought the black one and everytime I touch the table it leaves fingerprints.

Very easy to built. I’m a single mom and was worried I was going to have to pay someone to put it together for me but I did need to. It even came with all the lil tools I needed. Great purchase

Assembled in under an hour with no problems. Perfect fit for an Xbox Series X and a 22-inch monitor side by side. Rolls smoothly.

Easy to assemble just remember on the big piece a bracket goes on both sides of bar it's great

This was the perfect fit for my laptop needs and can extend from a sitting position to a standing position. Assembly was easy as it comes in three parts that are already assembled. Included all the hardware and tools to assemble. The hydraulic lift can take me leaning on it. When going back down in height you do have to push pretty hard to get it to go down. Overall a great looking stand which adds some need functionality for a mobile workspace.

Basic table that was easy to build. Gets the job done. However, it was delivered with a missing part that supports the tilting mechanism underneath the tabletop. I had to find a replacement part to keep the table from tilting on its own. My last complaint is that the table top also was delivered with a noticeable chip.

This table works better standing desk table than over bed table. I got this because I having back surgery soon and thought it would be help full during recovery. It testing it I whished it hung over the bed a little farther. I could not adjust the table down while I was laying in bed. The tilt adjustment was very awkward because the lever is at the back of the table and I couldn't reach the lever from the top of the table to tilt it. It was packed very well and was easy to assemble.

The UPGRAVITY Adjustable 90° Tiltable Mobile Desk measures 16"D × 32"W × 27.5"H, and can be extended to a height of 41.3 inches. It is well made and very sturdy. It was easy to set up and only took me about 20 minutes because the instructions are clear & easy to follow. I love that it has wheels making it easy to move around. The adjustable height is great because it can be used sitting or standing, and there is an anti-slip pad to keep your computer from sliding. It is really easy to adjust the height and tilt so that made me happy. This table can be used in many situations...as a side table while sitting in the living room, for doing work/homework, and can even be used as a medical hospital table. This table is both practical and functional, and I would recommend it.

Good product that serves its purpose. The stand is firm and sturdy, with a table that's double-sided. One side tilts as needed. The wheels roll smoothly and can lock as well. The height is adjustable and easy to do.

It comes with one of the best sets of instructions ever, making assembling extremely easy. That is according to my husband, the assembler. This table/desk can be used as an overbed table or for many other purposes. It can support a sewing machine. It can be used as a table to create art, for crafting, writing, or as a computer table, etc. It has adjustable levels, tilts and is sturdy, sleek. I have it in white which fits more in with my furniture than other mobile desks or tables. The small wheels rotate 360° and are mounted inside the base and invisible unless you turn the table over. They easily glide on most surfaces. I am uncertain about carpet. The table has enough space for my 14” laptop, mouse pad with plenty of extra room for papers. Use caution when raising the table as it slides up quickly when pressing the up lever. I apply a little weight to the top by leaning on it with my forearm, or elbow.

The only thing I might change on this is making the painted metal finish matte instead of high gloss to better match the nice laminate top. It is high gloss “snow white” which is good for keeping clean but a little stark for me.I really like the fact that the height adjustment is via a gas spring - like an office chair - vs. an electric motor as it’s one less thing to break and does not rely on a rechargeable battery which may not last as long as the desk.It’s a little bigger than others I’ve reviewed which is a plus. The little gray stick on pad is nicely designed to provide a wrist rest and keep items from rolling off when tilted.The built in casters are great. The controls are easy to use. Lift and lower with a handle on the right. It’s a two hand operation. And the tilt top easily moves to multiple positions with the paddle lever on the bottom.It took me about 30 minutes to unpack and build. The instructions were good.Make sure to have a Philips head screwdriver as the two-in-one Allen/Phillips wrench provided will take forever. Don’t tighten down any screws until all are screwed in lightly or it will be difficult to get the last ones in.Be careful not to over tighten the screws holding the plate to the bottom of the desktop. I stopped short of making them as tight as I could over concern of stripping the wood core. It would be good if the instructions addressed fastener tightening.The price is reasonable. It seemed quite sturdy despite the stated low 17.6 lb. weight for the desktop. Given that limit, I would be careful not to lean too much weight of your weight on it when using as a standing desk.You can extend the warranty to 3 years by registering at their website. Instructions are on the back of the assembly booklet.

I like that this table came with detailed instructions for putting it together. The diagrams indicating which pieces go where were very helpful and it only took me about 30 minutes to assemble. I found the letter designations for the different parts to be especially helpful.The only challenge I ran into was setting the lever that adjusts the height of the table. At first it was unclear where it should go, but then I realized I was holding the diagram upside down (oops) and was finally able to get it together. The table is very sturdy and solid. It adjusts to a height that allows you to stand and work, or you can lower it enough to sit in bed and use it, too. Overall a good investment.

It's the perfect for me, it's a good size it fits my laptop perfectly, you can make it completely flat or slanted if need be with the smaller right side staying flat for notepad, cups, controller whatever and the height is also adjustable, so the functionality is good on that part. Super easy to put together, it's not too heavy but it doesn't feel cheap either. And it rolls under my bed so the desk is right where I need it. Good value for the what you get, I have seen some that don't have any features for higher price.

My wife needed a table that she could adjust hight and angle to relieve her neck pain. This was a good choice that was not very expensive. The desk is very sturdy and looks great. The only downside is the you need to loosen and tighten screws every time you want to adjust the height. Other than that it is perfect.

I'm not always the most mechanically inclined so often worry about whether or not it's going to take me 3hrs to build. This IS NOT the case, the design is sufficient that by following the pictures, you can do the thing. The only thing that bit me was that I tried to insert the arm into the rings missing the fact that the last ring on the mouse rest portion needed to be installed last (because the joint isn't centered or in the middle.) But in the end it took me maybe 45min to put together nice and tight. The next one I could do in 10min.It's early on but the table is super sturdy, I worried that typing would be wobbly but that just isn't the case. If after a few months this changes, I'll gladly come back to update the review.The only "flaws" with it are that the tabletop is laminated MDF, but for the $50 price category are you expecting hickory or walnut? The drawback here of course being that I can imagine the edges being worn smooth after a few years of use. No big deal here.The height is important for me as I wanted to be able to stow it under my workstation desk that includes a sliding tray for music keyboards, so I needed something that would go under 23", and this was one of the few that could accommodate that. It works, and also, the telescoping neck is sufficient (doesn't use a hole mechanism to lock) to get at exactly the right extended height quickly that it can nestle easily in the space above the synths but not touching the top of the desk. (See photo)But I have to stress, for as low a price as we have, the sturdiness of the construction is definitely chef's kiss.

1-relatively easy to assemble though I had a beast of a time with twoof the four screws that attach the vertical arm to the rolling base. I had to find a longer allen wrench to be able to get those in and even then it wasn't easy. The pieces are heavy, at least heavier than two other similar mobile desks I've assembled. Be careful with the pneumatic lever that extends the vertical bar: I inadvertantly lifted it during assembly while I had the pieces on a counter and the vertical arm came out with a lot of force and left dents in the door frame that stopped its progress.2-large surface area. plenty big for a laptop, mouse, notepad, and drink.3-easy to tilt and/or raise. the separate levers work well to tilt (which i won't use) and raise. It is more difficult to lower and takes some force on both ends of the top while holding the lever to get it down.4-rolling isn't great. it's just ok on hardwoods and more difficult on carpet.5-definitely works better for situations where you want the verical arm to your right, e.g having it on the right side of bed (right if standing at headboard looking toward foot of bed). Could be used on other side of bed if you don't need tilt.For the price, this is a good mobile desk if you want something in white with a large surface area and want to be able to raise/lower and/or tilt the top.

This Overbed Bedside Desk Mobile Rolling Laptop Stand is a fantastic addition to any home, offering remarkable versatility and functionality. Whether you’re working on your computer, enjoying a snack, or having breakfast in the backyard, this desk adapts to your needs effortlessly.Versatility and Usage: I’ve found this desk incredibly useful in various settings. It serves perfectly as a workstation on my patio, providing a stable surface for my laptop. Additionally, it’s great for keeping snacks nearby while watching late-night movies or as a makeshift breakfast table outdoors. Its adaptability makes it a valuable piece of furniture for any household.Mobility and Build Quality: The wheels are a standout feature, allowing easy movement throughout the home. The desk’s build quality is impressive, with a sturdy and durable construction that shows no signs of flexing or bending during use. Assembly was straightforward, taking only 20-25 minutes, and the instructions were clear and easy to follow.Design and Aesthetics: One of the highlights is the wood grain finish on the tabletop. Although it’s not real wood, the laminated MDF or engineered wood surface is beautifully finished and has a matte texture that feels durable. The desk’s aesthetic appeal adds a touch of elegance to any room.Functionality: For smaller laptops up to 15 inches, this desk works perfectly. However, my 17-inch work laptop, which is heavier and has beveled edges, tends to slide down the desk over the edge stopper. This is a minor inconvenience but worth noting for those with larger laptops.Additional Features: The split design is another excellent feature, providing space for a mouse or your favorite drink on the side. This thoughtful design enhances the desk’s utility, making it even more convenient for various tasks.Conclusion: Overall, I highly recommend this desk for its versatility, sturdiness, and elegant design. It’s a practical and affordable solution for anyone looking to enhance their home workspace or enjoy a convenient surface for various activities.